› Response of a Deterministic and Stochastically Excited Nonlinear Oscillator - David Hawes, Department of Engineering [Cambridge]
08:40-09:00 (20min)
› Passive suppression of helicopter ground resonance instability by means of a strongly nonlinear absorber - baptiste bergeot, Ecole Centrale de Marseille / Laboratoire de Mécanique et d'Acoustique [Marseille]
09:00-09:20 (20min)
› Modelling of a complex, nonlinear rotor system using 3D solid finite elements - Theo Kiesel, Universitat der Bundeswehr Munich, Germany
09:20-09:40 (20min)
› Numerical and experimental study of the energy pumping of the first vibration modes of a mechanical system using bi-stable attachment - Pierre-Olivier Mattei, Laboratoire de Mécanique et d'Acoustique
09:40-10:00 (20min)
› Robust source array configuration for minimizing the effect of reflection in an interior space - Wan-Ho Cho, Korea Research Institute of Standards and Science
08:40-09:00 (20min)
› A Condensed Transfer Function Method as a Tool for Solving Vibroacoustic Problems - Valentin Meyer, DCNS Research, Laboratoire Vibrations Acoustique
09:00-09:20 (20min)
› A scaling approach for the vibro-acoustic analysis of a complex system in the mid-frequency region - Xianhui Li, Beijing Key Laboratory of Environmental Noise and Vibration, Beijing Municipal Institute of Labor Protection
09:00-09:20 (20min)
› Stabilized finite element formulation for the mixed convected wave equation in domains with driven flexible boundaries - Oriol Guasch, La Salle, Universitat Ramon llull
09:40-10:00 (20min)
› Comparison of compressible and incompressible CFD methods for the acoustic analysis of flow induced noise in confined flows - Natalie Witkowski, Technical University of Vienna
08:40-09:00 (20min)
› Damping identification of an elastic panel coupled to a fluid: model-scale and full-scale investigations for ships - Daniele Dessi, National Research Council - Marine Technology Research Institute
09:00-09:20 (20min)
› Aeroacoustic response of a T-junction with bias flow - Lin Du, KTH-CCGEx, The Marcus Wallenberg Laboratory for Sound and Vibration Research - Mats Åbom, KTH-CCGEx, The Marcus Wallenberg Laboratory for Sound and Vibration Research
09:20-09:40 (20min)
› Low frequency control of the response of composite material panels to turbulent boundary layer excitation - Elena Ciappi, National Research Council of Italy, Marine Technology Research Institute, Rome, Italy
09:40-10:00 (20min)
› VFC-variational feedback control applied to semi-active car suspensions - Gianluca Pepe, Sapienza Università di Roma
14:00-14:20 (20min)
› Semi-active vibration control via VFC-variational feedback by piezoelectric actuation - Gianluca Pepe, Sapienza Università di Roma
14:20-14:40 (20min)
› Effect of eccentricity and gain control for high speed rigid rotor supported by hybrid foil-magnetic bearing - Yong-Bok Lee, Korea Institute of Science and Technology
14:40-15:00 (20min)
› Novel architecture of MEMS microphone with piezoresistive nano gauges detection - Emmanuel Redon, Laboratoire Vibrations Acoustique
14:00-14:20 (20min)
› Recent simulation techniques of viscous and thermal losses of sound waves in fluids and their applications in the micro-scale - Vicente Cutanda Henriquez, University of Southern Denmark
14:20-14:40 (20min)
› Indicators of real gear transmission defects using sound perception - Nacer Hamzaoui, INSA Lyon , Laboratoire Vibration Acoustique
14:40-15:00 (20min)
› Flow-induced interior noise from a turbulent boundary layer of a towed body - Jan Abshagen, Research Department for Underwater Acoustics and Marine Geophysics, Bundeswehr Technical Center WTD 71
14:00-14:20 (20min)
› Flow-Induced Noise of a Moderate Reynolds Number Jet Interacting with a Tangential Flat Plate - Alessandro Di Marco, Università degli Studi ROMA TRE
14:20-14:40 (20min)
› Extraction of the acoustic part of a turbulent boundary layer from wall pressure and vibration measurements - Quentin Leclère, Laboratoire Vibrations Acoustique
14:40-15:00 (20min)
Laurea I
