› Stochastic radiated sound power of structures with uncertain parameters - Christian Geweth, Universität der Bundeswehr München
08:20-08:40 (20min)
› Simple vibroacoustic systems – Influence of uncertainties in simulation and experiment - Patrick Langer, M. Krause, Steffen Marburg, Kheirollah Sepahvand
08:40-09:00 (20min)
› Uncertainty propagation in random coupled structures applied to the wave finite element method - Olivier Bareille, Laboratoire de Tribologie et Dynamique des Systèmes
09:00-09:20 (20min)
› A model of mechanical contacts in hearing aids for uncertainty analysis - Ester Creixell-Mediante, Oticon A/S
09:20-09:40 (20min)
› Variability analysis of vibrational responses in a passenger car considering uncertainties of elastomers - Dooho Lee, Dongeui Unversity
09:40-10:00 (20min)
› Modal estimation of a cantilever using video images - Soo Il Lee, University of Seoul
08:20-08:40 (20min)
› Piano soundboard vibro-acoustic modeling through decomposition on the basis of orthotropic simply supported unribbed plate modes - Benjamin Trévisan, Laboratoire Vibrations Acoustique
08:40-09:00 (20min)
› Opportunities and limitations on vibro-acoustic design of vehicle structures by means of energy flow-based numerical simulation - Johannes Ebert, BMW Group, Department of Structural Dynamics, Structure-borne Sound and Vibrations
09:00-09:20 (20min)
› Energy flow in structures built up of plates and beams - Anders Nilsson, University of Brescia, Dept. Mechanical and Industrial Engineering
09:20-09:40 (20min)
› Experimental modal based vibro-acoustic analysis of sandwich panels - Stephen Hambric, ARL/Penn State
09:40-10:00 (20min)
› Resolution improvement of noise sources in high-speed trains by inverse problem optimization - Hee-Min Noh, Korea Railroad Research Institute
08:40-09:00 (20min)
› A microphone clustering approach for improved Generalized Inverse Beamforming formulation - Claudio Colangeli, Siemens Industry Software NV
09:00-09:20 (20min)
› CIBNAH: a new Near-field Acoustic Holography method with no requirement for reference signals - Armand Nejade, Institut national de recherche et de sécurité
09:20-09:40 (20min)
› Source identification by Vibratory Holography - Corentin Chesnais, Laboratoire Vibrations Acoustique de Lyon
09:40-10:00 (20min)
› Acoustic performance of sonic crystal noise barriers using a quasi-periodic boundary element technique - Nicole Kessissoglou, UNSW Australia
08:40-09:00 (20min)
› Resonant lattices for low-frequency vibro-acoustic control - Flaviano Tateo, Technische Universiteit Eindhoven
09:00-09:20 (20min)
› Design and verification of vibration isolation of buildings against structure-borne noise, generated by trains - Fülöp Augusztinovicz, Budapest University of Technology and Economics, Dept. of Networked Systems and Services
09:20-09:40 (20min)
› Prediction of noise from vibroacoustic sources in industrial conditions - Goran Pavić, Laboratoire Vibrations Acoustique
09:40-10:00 (20min)
› Analysis of excitations from the wavenumber point of view - Fabien Chevillotte, Matelys
14:40-15:00 (20min)
› Source fields reconstruction on a 3D structure in noisy environment - Sandra Forget, Centre Technique Renault de Lardy
15:00-15:20 (20min)
› Identification of vibration sources from measurements of transverse displacement, from a Bayesian point of view. - Charly Faure, Laboratoire d'acoustique de l'université du Maine
15:20-15:40 (20min)
› Reconstruction of deterministic and random excitations on a bending plate using the virtual fields method - Alain Berry, Groupe d'Acoustique de l'Université de Sherbrooke
15:40-16:00 (20min)
› Muffler design by sub-chamber optimization: with application to a mining truck muffler - Li Cheng, The Hong Kong Polytechnic University [Hong Kong]
14:40-15:00 (20min)
› Numerical modeling of fan noise in electronics - Sergey Timushev, Moscow Aviation Institute
15:00-15:20 (20min)
› Optimisation and implementation of a hybrid passive silencer for improved sound quality - Hugh Hopper, Dyson Ltd
15:20-15:40 (20min)
› Design relation and end correction formula for multi-orifice intruded Helmholtz resonators - Chandramouli Padmanabhan, Indian Institute of Technology Madras
15:40-16:00 (20min)
› Transmission and reflection of waves in joined plates - Giannoula Mitrou, ISVR, University of Southampton
14:40-15:00 (20min)
› Numerical tools for efficient simulations of wave propagation in damped periodic structures - Kevin Billon, Département de Mécanique Appliquée R. Chaléat
15:00-15:20 (20min)
› Predicting noise and vibration band gaps in flexible rings via a SEM/BEM formulation - Danilo Beli, Universidade Estadual de Campinas
15:20-15:40 (20min)
› A waveguide approach to the vibrational power flow in pipes with bends - Andrea Ricci, University of Southampton (Southampton, UK)
15:40-16:00 (20min)
› Transfer Path Analysis methods applied to diagnostic testing of sound insulation performance of cavity constructions. - Nikhilesh Patil, University of Salford - Andy Elliott, University of Salford
16:40-17:00 (20min)
› Effects of macro porosity in poroelastic materials on noise control of acoustic cavity - Shantanu Kore, Department of Mechanical Engineering, India
17:00-17:20 (20min)
› Bayesian inversion from Sabine absorption coefficients to flow resistivity values for porous absorbers - Cheol-Ho Jeong, Acoustic Technology, Department of Electrical Engineering, Technical University of Denmark
17:20-17:40 (20min)
› A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation. - Claus Claeys, KU Leuven
17:40-18:00 (20min)
› Bi-orthogonality conditions for power flow analysis in fluid-loaded elastic cylindrical shells: theory and applications - Lasse Ledet, Department of Mechanical and Manufacturing Engineering, Aalborg University
16:40-17:00 (20min)
› Tracking vibrational energy on curved shell structures in the mid-high frequency limit - a ray-tracing approach - Gregor Tanner, University of Nottingham
17:00-17:20 (20min)
› Extensions of the variational theory of complex rays in the general shell theory framework - Alessandro Cattabiani, LMT-Cachan (ENS Cachan/CNRS/Paris-Saclay-University)
17:20-17:40 (20min)
› On the use of the wave finite element method for passive vibration control of periodic structures - José Roberto Arruda, Departamento de Mecânica Computacional, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas
17:40-18:00 (20min)
Lavandula I
