|
Monday, April 13, 2015
| Time | Event | |
| 08:00 - 08:40 | REGISTRATION - Welcome and registation | |
| 08:40 - 09:00 | OPENING - OPENING | |
| 09:00 - 10:00 | DA: Duct Acoustics (Laurea I) | |
| 09:00 - 09:20 | › Consequences of the Ingard-Myers coupling condition in the case of a low frequency guided acoustic wave convected and coupled with a yielding wall - Virgile Meyer, Institut Jean Le Rond d'Alembert | |
| 09:20 - 09:40 | › Linear stability analysis of in-duct deep cavities - Mikael Karlsson, Royal Institute of Technology, Competence center for gas exchange | |
| 09:40 - 10:00 | › Acoustic scattering and one-way propagation in purely reacting lined duct with flow - Yves Aurégan, Laboratoire d'acoustique de l'université du Maine | |
| 09:00 - 10:00 | EH: Energy Harvesting (Laurea I) | |
| 09:00 - 09:20 | › Modelling of drive-train using a piezoelectric energy harvesting device integrated with a rotational vibration absorber - Francesco Infante, Fraunhofer Institute for Structural Durability and System Reliability LBF | |
| 09:20 - 09:40 | › Vibration energy harvesting and optimal control theory: an investigation on physical limitations in capturing the environmental energy - Rafael Rojas, Sapienza Università di Roma | |
| 09:40 - 10:00 | › An analytical model of a piezoelectric energy harvesting device integrated with a rotational vibration absorber - Sara Perfetto, Fraunhofer Institute for Structural Durability and System Reliability LBF | |
| 09:00 - 10:00 | VF: Vibration Friction (Laurea II) | |
| 09:00 - 09:20 | › A Tangential Microslip Model for Circularly and Elliptically Loaded Structures - Charles Lord, Department of Mechanical Engineering [Sheffield] | |
| 09:20 - 09:40 | › An active vibration control strategy to stabilize the friction induced vibration using h-infinite methodology - Yao Liang, Tokyo Institute of Technology | |
| 09:40 - 10:00 | › Instability analysis of friction oscillators with uncertainty in friction law distribution - Joseph Lai, The University of New South Wales | |
| 10:00 - 10:30 | Coffee break | |
| 10:30 - 12:30 | FORUM I: Cost-Effective Simulation Methods of Vibroacoustics (Lavandula I) - Chair: Dr. Alexander Pieffer; Dr. Rob Campbell; Dr. Gregor Tanner; Dr. Benoit Van den Nieuwenhof | |
| 12:30 - 14:00 | Lunch | |
| 14:00 - 14:40 | Distinguished Lecture I: In-duct inverse methods for aero-acoustics (Lavandula I) - Prof. Cristophe Schram | |
| 14:40 - 16:00 | SR: Sound Radiation modelling (Lavandula II) | |
| 14:40 - 15:00 | › Supersonic acoustic intensity and non-negative intensity for prediction of radiated sound - Steffen Marburg, Universität der Bundeswehr München | |
| 15:00 - 15:20 | › Hybrid Finite Element-Transfer Matrix method for vibroacoustic applications - Luca Alimonti, Department of Mechanical Engineering, Université de Sherbrooke | |
| 15:20 - 15:40 | › A comparison of acoustic radiation modes and frequency-independent normal modes in acoustic exterior problems - Lennart Moheit, Universität der Bundeswehr München | |
| 15:40 - 16:00 | › The interpolated time-domain equivalent source method for modeling transient sound propagation in half space - Weikang Jiang, Shanghai Jiao Tong University [Shanghai] | |
| 14:40 - 16:00 | SD: Structure-borne vibration Damping (Laurea II) | |
| 14:40 - 15:00 | › On Decoupled Shape-Parameterization of Damping Layers using Polygons - Gesche Fender, Technische Universtät München | |
| 15:00 - 15:20 | › Efficient damping treatment for structure-borne noise reduction in vehicles - Mariam Jaber, BMW Group | |
| 15:20 - 15:40 | › Semi-passive Control of the Acoustic Vibrations and Radiation Waves with a Periodic Lattice of Piezoelectric Patches - Charlie Bricault, Institue de Recherche Technologique Jules Verne / Laboratoire d'Acoustisque Université du Maine | |
| 15:40 - 16:00 | › SMP-based solution for structural damping - Morvan Ouisse, FEMTO-ST | |
| 14:40 - 16:00 | SY: System Identification (Lavandula II) | |
| 14:40 - 15:00 | › Model selection in inverse acoustic problems - Mathilde Griveaux, Institut Jean Le Rond d'Alembert, Laboratoire de Mécanique et d'Acoustique | |
| 15:00 - 15:20 | › Characterization of materials and flaw detection using force analysis technique - Thibault Wassereau, Laboratoire d'acoustique de l'université du Maine, Institut de Recherche Technologique Jules Verne | |
| 15:20 - 15:40 | › Investigations into the use of exact and distorted structural similitudes for the frequency response of plates - Viviana Meruane, Department of Mechanical Engineering, Universidad de Chile | |
| 15:40 - 16:00 | › A multi-sine sweep method for the characterization of weak non-linearities; plant noise and variability estimation - Kerem Ege, Laboratoire Vibrations Acoustique | |
| 16:00 - 16:40 | Coffee break | |
| 16:40 - 18:00 | EM: Energy Modelling approaches (Laurea I) | |
| 16:40 - 17:00 | › Statistical energy analysis: from the understanding of its assumptions to its practical use - Thibault Lafont, Laboratoire de Tribologie et Dynamique des Systèmes | |
| 17:00 - 17:20 | › Computation of modal energy transmission paths in SmEdA using graph theory algorithms - Angels Aragonès, La Salle, Universitat Ramon llull | |
| 17:20 - 17:40 | › Investigation for obtaining a modal coupling scheme in agreement with the SmEdA/SEA models for multi-subsystems connected at a junction - Laurent Maxit, Laboratoire Vibrations Acoustique | |
| 17:40 - 18:00 | › Coupling loss factor calculation through Lorentzian-weighted frequency averaging of the direct field dynamic stiffness. - Hendrik Devriendt, Department of Mechanical Engineering, KU Leuven | |
| 16:40 - 18:00 | CP: Composite Panels (Laurea II) | |
| 16:40 - 17:00 | › Anisotropic Damping Behaviour of Thermoplastic Composites - Matthias Klaerner, Technische Univresität Chemnitz | |
| 17:00 - 17:20 | › Mechanical characterisation of a bio-based composite panel - Viviana Meruane, Department of Mechanical Engineering, Universidad de Chile | |
| 17:20 - 17:40 | › Characterisation of viscoelastic layers in sandwich lightweight panels through inverse techniques - Lucie Rouleau, Laboratoire de Mécanique des Structures et des Systèmes Couplés, Cnam Paris, Department of Mechanical Engineering, KU Leuven | |
| 17:40 - 18:00 | › Stochastic vibroacoustic analysis of FRP composite plates with random spatial parameters - Kheirollah Sepahvand, Institute for Mechanics, Universität der Bundeswehr Munich | |
| 16:40 - 18:00 | ST: Sound Transmission (Lavandula II) | |
| 16:40 - 17:00 | › Transmission loss of one-dimensional systems with frequency-dependent complex masses - Waldemar Maysenhölder, Fraunhofer Institute for Building Physics, Department of Acoustics | |
| 17:00 - 17:20 | › Evaluation of the sound transmission loss using an impedance tube – The effect of sample's support conditions - Paulo Amado-Mendes, ITeCons / CICC, Dept. Eng. Civil, Universidade de Coimbra | |
| 17:20 - 17:40 | › Transmission loss of aluminum extruded panel - Jeung Tae Kim, Hongik University, SEOUL | |
| 17:40 - 18:00 | › The forced sound transmission of finite ribbed plates, investigating the influence of point connections and periodicity - Jonas Brunskog, Technical University of Denmark |
Tuesday, April 14, 2015
| Time | Event | |
| 08:20 - 10:00 | MU: Modelling of Uncertainties (Lavandula I) | |
| 08:20 - 08:40 | › Stochastic radiated sound power of structures with uncertain parameters - Christian Geweth, Universität der Bundeswehr München | |
| 08:40 - 09:00 | › Simple vibroacoustic systems – Influence of uncertainties in simulation and experiment - Patrick Langer, M. Krause, Steffen Marburg, Kheirollah Sepahvand | |
| 09:00 - 09:20 | › Uncertainty propagation in random coupled structures applied to the wave finite element method - Olivier Bareille, Laboratoire de Tribologie et Dynamique des Systèmes | |
| 09:20 - 09:40 | › A model of mechanical contacts in hearing aids for uncertainty analysis - Ester Creixell-Mediante, Oticon A/S | |
| 09:40 - 10:00 | › Variability analysis of vibrational responses in a passenger car considering uncertainties of elastomers - Dooho Lee, Dongeui Unversity | |
| 08:20 - 10:00 | VS: Vibroacoustics of Structures (Lavandula II) | |
| 08:20 - 08:40 | › Modal estimation of a cantilever using video images - Soo Il Lee, University of Seoul | |
| 08:40 - 09:00 | › Piano soundboard vibro-acoustic modeling through decomposition on the basis of orthotropic simply supported unribbed plate modes - Benjamin Trévisan, Laboratoire Vibrations Acoustique | |
| 09:00 - 09:20 | › Opportunities and limitations on vibro-acoustic design of vehicle structures by means of energy flow-based numerical simulation - Johannes Ebert, BMW Group, Department of Structural Dynamics, Structure-borne Sound and Vibrations | |
| 09:20 - 09:40 | › Energy flow in structures built up of plates and beams - Anders Nilsson, University of Brescia, Dept. Mechanical and Industrial Engineering | |
| 09:40 - 10:00 | › Experimental modal based vibro-acoustic analysis of sandwich panels - Stephen Hambric, ARL/Penn State | |
| 08:40 - 10:00 | SI: Source Identification (Laurea I) | |
| 08:40 - 09:00 | › Resolution improvement of noise sources in high-speed trains by inverse problem optimization - Hee-Min Noh, Korea Railroad Research Institute | |
| 09:00 - 09:20 | › A microphone clustering approach for improved Generalized Inverse Beamforming formulation - Claudio Colangeli, Siemens Industry Software NV | |
| 09:20 - 09:40 | › CIBNAH: a new Near-field Acoustic Holography method with no requirement for reference signals - Armand Nejade, Institut national de recherche et de sécurité | |
| 09:40 - 10:00 | › Source identification by Vibratory Holography - Corentin Chesnais, Laboratoire Vibrations Acoustique de Lyon | |
| 08:40 - 10:00 | CM: Modelling for N&V Control (Laurea II) | |
| 08:40 - 09:00 | › Acoustic performance of sonic crystal noise barriers using a quasi-periodic boundary element technique - Nicole Kessissoglou, UNSW Australia | |
| 09:00 - 09:20 | › Resonant lattices for low-frequency vibro-acoustic control - Flaviano Tateo, Technische Universiteit Eindhoven | |
| 09:20 - 09:40 | › Design and verification of vibration isolation of buildings against structure-borne noise, generated by trains - Fülöp Augusztinovicz, Budapest University of Technology and Economics, Dept. of Networked Systems and Services | |
| 09:40 - 10:00 | › Prediction of noise from vibroacoustic sources in industrial conditions - Goran Pavić, Laboratoire Vibrations Acoustique | |
| 10:00 - 10:30 | Coffee break | |
| 10:30 - 12:30 | FORUM II: Inverse Techniques in Vibration and Acoustics (Lavandula I) - Chair: Prof. Ines Lopez Arteaga; Prof. Andy Moorhouse; Prof. Peter Göransson; Prof. Jérôme Antoni | |
| 12:30 - 14:00 | Lunch | |
| 14:00 - 14:40 | Distinguished Lecture II: Periodicity-induced effects and methods in vibro-acoustics (Lavandula I) - Prof. Sergey Sorokin | |
| 14:40 - 16:00 | EI: Excitation Identification (Laurea I) | |
| 14:40 - 15:00 | › Analysis of excitations from the wavenumber point of view - Fabien Chevillotte, Matelys | |
| 15:00 - 15:20 | › Source fields reconstruction on a 3D structure in noisy environment - Sandra Forget, Centre Technique Renault de Lardy | |
| 15:20 - 15:40 | › Identification of vibration sources from measurements of transverse displacement, from a Bayesian point of view. - Charly Faure, Laboratoire d'acoustique de l'université du Maine | |
| 15:40 - 16:00 | › Reconstruction of deterministic and random excitations on a bending plate using the virtual fields method - Alain Berry, Groupe d'Acoustique de l'Université de Sherbrooke | |
| 14:40 - 16:00 | CD: Design for N&V control (Laurea II) | |
| 14:40 - 15:00 | › Muffler design by sub-chamber optimization: with application to a mining truck muffler - Li Cheng, The Hong Kong Polytechnic University [Hong Kong] | |
| 15:00 - 15:20 | › Numerical modeling of fan noise in electronics - Sergey Timushev, Moscow Aviation Institute | |
| 15:20 - 15:40 | › Optimisation and implementation of a hybrid passive silencer for improved sound quality - Hugh Hopper, Dyson Ltd | |
| 15:40 - 16:00 | › Design relation and end correction formula for multi-orifice intruded Helmholtz resonators - Chandramouli Padmanabhan, Indian Institute of Technology Madras | |
| 14:40 - 16:00 | VW: Vibration Waves (Lavandula II) | |
| 14:40 - 15:00 | › Transmission and reflection of waves in joined plates - Giannoula Mitrou, ISVR, University of Southampton | |
| 15:00 - 15:20 | › Numerical tools for efficient simulations of wave propagation in damped periodic structures - Kevin Billon, Département de Mécanique Appliquée R. Chaléat | |
| 15:20 - 15:40 | › Predicting noise and vibration band gaps in flexible rings via a SEM/BEM formulation - Danilo Beli, Universidade Estadual de Campinas | |
| 15:40 - 16:00 | › A waveguide approach to the vibrational power flow in pipes with bends - Andrea Ricci, University of Southampton (Southampton, UK) | |
| 16:00 - 16:40 | Coffee break | |
| 16:40 - 18:00 | CT: Characterisation Techniques (Laurea I) | |
| 16:40 - 17:00 | › Characterisation of sound sources by plane surface harmonics - Liangfen Du, Laboratoire Vibrations Acoustique | |
| 17:00 - 17:20 | › Characterisation of air-borne noise by a dummy-source approach - Anders Lindberg, Laboratoire Vibrations Acoustique | |
| 17:20 - 17:40 | › In-situ determination of dynamic stiffness for resilient elements - Meggitt Joshua, University of Salford | |
| 17:40 - 18:00 | › Detailed directivity measurements of aerodynamic sound sources - Andrew Elliott, University of Salford | |
| 16:40 - 18:00 | VP: analysis of Vibroacoustical Properties (Laurea II) | |
| 16:40 - 17:00 | › Transfer Path Analysis methods applied to diagnostic testing of sound insulation performance of cavity constructions. - Nikhilesh Patil, University of Salford - Andy Elliott, University of Salford | |
| 17:00 - 17:20 | › Effects of macro porosity in poroelastic materials on noise control of acoustic cavity - Shantanu Kore, Department of Mechanical Engineering, India | |
| 17:20 - 17:40 | › Bayesian inversion from Sabine absorption coefficients to flow resistivity values for porous absorbers - Cheol-Ho Jeong, Acoustic Technology, Department of Electrical Engineering, Technical University of Denmark | |
| 17:40 - 18:00 | › A lightweight vibro-acoustic metamaterial demonstrator: Numerical and experimental investigation. - Claus Claeys, KU Leuven | |
| 16:40 - 18:00 | SV: Shell Vibration (Lavandula II) | |
| 16:40 - 17:00 | › Bi-orthogonality conditions for power flow analysis in fluid-loaded elastic cylindrical shells: theory and applications - Lasse Ledet, Department of Mechanical and Manufacturing Engineering, Aalborg University | |
| 17:00 - 17:20 | › Tracking vibrational energy on curved shell structures in the mid-high frequency limit - a ray-tracing approach - Gregor Tanner, University of Nottingham | |
| 17:20 - 17:40 | › Extensions of the variational theory of complex rays in the general shell theory framework - Alessandro Cattabiani, LMT-Cachan (ENS Cachan/CNRS/Paris-Saclay-University) | |
| 17:40 - 18:00 | › On the use of the wave finite element method for passive vibration control of periodic structures - José Roberto Arruda, Departamento de Mecânica Computacional, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas |
Wednesday, April 15, 2015
| Time | Event | |
| 08:40 - 10:00 | NV: Nonlinear Vibration (Laurea I) | |
| 08:40 - 09:00 | › Response of a Deterministic and Stochastically Excited Nonlinear Oscillator - David Hawes, Department of Engineering [Cambridge] | |
| 09:00 - 09:20 | › Passive suppression of helicopter ground resonance instability by means of a strongly nonlinear absorber - baptiste bergeot, Ecole Centrale de Marseille / Laboratoire de Mécanique et d'Acoustique [Marseille] | |
| 09:20 - 09:40 | › Modelling of a complex, nonlinear rotor system using 3D solid finite elements - Theo Kiesel, Universitat der Bundeswehr Munich, Germany | |
| 09:40 - 10:00 | › Numerical and experimental study of the energy pumping of the first vibration modes of a mechanical system using bi-stable attachment - Pierre-Olivier Mattei, Laboratoire de Mécanique et d'Acoustique | |
| 08:40 - 10:00 | IM: Innovative Modelling approaches (Laurea II) | |
| 08:40 - 09:00 | › Robust source array configuration for minimizing the effect of reflection in an interior space - Wan-Ho Cho, Korea Research Institute of Standards and Science | |
| 09:00 - 09:20 | › A Condensed Transfer Function Method as a Tool for Solving Vibroacoustic Problems - Valentin Meyer, DCNS Research, Laboratoire Vibrations Acoustique | |
| 09:00 - 09:20 | › A scaling approach for the vibro-acoustic analysis of a complex system in the mid-frequency region - Xianhui Li, Beijing Key Laboratory of Environmental Noise and Vibration, Beijing Municipal Institute of Labor Protection | |
| 09:40 - 10:00 | › Stabilized finite element formulation for the mixed convected wave equation in domains with driven flexible boundaries - Oriol Guasch, La Salle, Universitat Ramon llull | |
| 08:40 - 10:00 | FM: Flow acoustics Modelling (Lavandula II) | |
| 08:40 - 09:00 | › Comparison of compressible and incompressible CFD methods for the acoustic analysis of flow induced noise in confined flows - Natalie Witkowski, Technical University of Vienna | |
| 09:00 - 09:20 | › Damping identification of an elastic panel coupled to a fluid: model-scale and full-scale investigations for ships - Daniele Dessi, National Research Council - Marine Technology Research Institute | |
| 09:20 - 09:40 | › Aeroacoustic response of a T-junction with bias flow - Lin Du, KTH-CCGEx, The Marcus Wallenberg Laboratory for Sound and Vibration Research - Mats Åbom, KTH-CCGEx, The Marcus Wallenberg Laboratory for Sound and Vibration Research | |
| 09:40 - 10:00 | › Low frequency control of the response of composite material panels to turbulent boundary layer excitation - Elena Ciappi, National Research Council of Italy, Marine Technology Research Institute, Rome, Italy | |
| 10:00 - 10:30 | Coffee break | |
| 10:30 - 12:30 | FORUM III: Meta-materials applied to sound control (Lavandula I) - Chair: Prof Wim Desmet; Prof. Zhiyu Yang; Prof. José Sánchez-Dehesa; Prof. Massimo Ruzzene | |
| 12:30 - 13:45 | Lunch | |
| 13:45 - 14:00 | Award Ceremony | |
| 14:00 - 15:20 | AC: Active Control approaches (Laurea I) | |
| 14:00 - 14:20 | › VFC-variational feedback control applied to semi-active car suspensions - Gianluca Pepe, Sapienza Università di Roma | |
| 14:20 - 14:40 | › Semi-active vibration control via VFC-variational feedback by piezoelectric actuation - Gianluca Pepe, Sapienza Università di Roma | |
| 14:40 - 15:00 | › Effect of eccentricity and gain control for high speed rigid rotor supported by hybrid foil-magnetic bearing - Yong-Bok Lee, Korea Institute of Science and Technology | |
| 14:00 - 15:20 | TA: Tools for vibroacoustics Analysis (Laurea II) | |
| 14:00 - 14:20 | › Novel architecture of MEMS microphone with piezoresistive nano gauges detection - Emmanuel Redon, Laboratoire Vibrations Acoustique | |
| 14:20 - 14:40 | › Recent simulation techniques of viscous and thermal losses of sound waves in fluids and their applications in the micro-scale - Vicente Cutanda Henriquez, University of Southern Denmark | |
| 14:40 - 15:00 | › Indicators of real gear transmission defects using sound perception - Nacer Hamzaoui, INSA Lyon , Laboratoire Vibration Acoustique | |
| 14:00 - 15:20 | FE: Flow acoustics Measurement (Lavandula II) | |
| 14:00 - 14:20 | › Flow-induced interior noise from a turbulent boundary layer of a towed body - Jan Abshagen, Research Department for Underwater Acoustics and Marine Geophysics, Bundeswehr Technical Center WTD 71 | |
| 14:20 - 14:40 | › Flow-Induced Noise of a Moderate Reynolds Number Jet Interacting with a Tangential Flat Plate - Alessandro Di Marco, Università degli Studi ROMA TRE | |
| 14:40 - 15:00 | › Extraction of the acoustic part of a turbulent boundary layer from wall pressure and vibration measurements - Quentin Leclère, Laboratoire Vibrations Acoustique | |
| 15:20 - 15:40 | Farewell Party |
|
|